Cotton Sleeping Bag Liner – Travel Long Style
Original price was: ₹1,650.00.₹1,221.00Current price is: ₹1,221.00. (all prices include GST)Cotton Sleeping Bag liner in a traveller style with an integrated pillow slip.
Very soft hand feel with a small percentage of Lycra to enable the liner to turn along with you when you shift on your side. The Lycra blend also allows for you to stretch your legs inside the liner and feel less confined in a small space
An essential to ensure hygiene over long trips in the mountains or back country, or even while slumming it out in seedy hotels while on adventure trips, or on the trains.
Pillow Sleeve on the top and half sewn and half buttoned side seams to let you maintain a comfortable temperature and sleeping arrangement. Pillow is not included.
Packed Weight: 400 grams
Open Size: 90 x 215 cm
Packed Size: 22 x 15 x 8 cm
CRUX HIKING TARP – 19 Loops
Price range: ₹2,999.00 through ₹3,999.00 (all prices include GST)Tarp tent with multiple possibilities to pitch it.
This versatile and ultralight travel canopy can be used in diverse combinations for shelter from sun, rain or snow, or for a bivouac. It features Polyester fabric with 3,000 mm Hydrostatic Head waterproof PU coating and fully taped seams. There are 19 guy out points and 19 webbing loops. Any of these could be used either to anchor the canopy to the ground or trees using guy lines, or you could simply pitch it using your trekking poles and make an A-shaped bivouac.
Accessories such as guy ropes and carabiners are not included in this.
Instruction ManualDouble Ring Anchor
Original price was: ₹599.00.₹519.00Current price is: ₹519.00. (all prices include GST)– Double rings anchors available in SS 304 (for M12 and M10 bolts). marine grade available on request, prices will vary.
– Our regular Dynamo rock anchor conforms to EN 959:2016 and CE 3076
– MBS (rings): 30 kN
Dunagiri Body Harness
₹4,699.00 (all prices include GST)A body harness would keep you in an upright position even in the case of unconsciousness
Material Composition and Physical Properties
- Webbings: 100% high tenacity Polyamide 6,6 (Nylon)
- Buckles: 100% 304-L Stainless Steel
- Wide, flexible straps (43 mm and soft hand feel)
- Fully adjustable shoulder straps and leg loops for snug fit
- Weight: 800 grams
- Size: Universal (ADULTS)
- Instruction Booklet: Included
MBS and Certifications
- Buckle Breaking Strength (twisted and deformed but not broken): 12 kN
- Slippage of webbings under load of 20kN: 1 cm (maximum permissible slippage: 2 cm)
- Webbing Breaking Strength (single strand): 8kN
- Static Breaking Strength of the tie-in point in conformity to EN 12277: 22kN (minimum requirement by EN 12277 is 15kN)
- EN 12277 tested and certified
Expected Life Span:
- Shelf life (not used even once): 3 years
- Occasional usage: 3 years
- Excessive / frequent usage such as for commercial activities: 1 year
- Limited Warranty: 2 years but shall be void in case of equipment damage arising out of product misuse
NOTE: If you see any sign of wear and tear in the harness, it is better to retire the equipment.
Each piece of equipment is meticulously inspected and a batch is tested for breaking strength (destructive) before shipping.
User Instructions
Download the PDFDunn Rain Jacket
₹730.00 (all prices include GST)A light weight and packable rain jacket. Easy on your pocket, and has you covered when you need it.
Comes with its own stuff sack. Seam taped and water resistent PU coating on the fabrics. Spacious enough to accommodate a 40 liter rucksack
YKK front 1/4 neck zipper and cinch cord around the hoodie. Full sleeved to keep you dry, and yet allows for articulation.
Weight: 275 grams
Dynamo Expansion Bolt M10x100mm – SS304
₹190.00 (all prices include GST)Dynamo Expansion Bolt, M10X100mm, SS304, for rock anchors.
Dynamo Expansion Bolt M10x70mm – SS304
₹150.00 (all prices include GST)– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 10mm
– Placement length: 62mm
– Recommended length of bore in rock: 70mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDFDynamo Expansion Bolt M12x95mm – SS304
₹200.00 (all prices include GST)– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 12mm
– Placement length: 87mm
– Recommended length of bore in rock: 95mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDFDynamo Expansion Bolt M12x95mm – SS316
₹250.00 (all prices include GST)– Stainless Steel 316 wedge type expansion bolts for outdoor use (marine grade).
– Diameter: 12mm
– Placement length: 87mm
– Recommended length of bore in rock: 95mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF
