-
Gipfel Oval Quick links
₹390.00– 304 Stainless Steel for outdoors and indoors use
– Breaking Strength : 45kN, Safe Working Load: 11kN
– These are not yet CE and UIAA certified but we guarantee the performance and breaking load
– Individually tested before shipping for your safety -
Gipfel Rope Protector for single and double rope
₹549.00 – ₹899.00- Heavy duty and dual layered Rope protector
- For both single and double ropes. Fit for both climbing and industrial use.
- Made from wear resistant tough material.
- Rope slides easily through the rope protector.
- Can be attached to the rope using a cord and a knot
- Elastic retainer to fold the rope protector into a compact size
- Fabric has insulating properties to prevent the rope from getting heated up too easily
- Weight: 60 cm long (100 gm), 100 cm long (170 gm)
-
Stratos Helmet
Original price was: ₹4,699.00.₹2,999.00Current price is: ₹2,999.00.- A good all-rounder and durable helmet for ice climbing, mountaineering and multi-pitch trad climbing.
- Optimal ventilation via the integrated venting system
- Universal headlamp attachments
- Fits heads 52 to 61 cms
- 11 vents (6 on the sides, 2 in front and 3 on the back) make this helmet wearable even in hot weather conditions. “A helmet that makes your head warm could lead to more problems than just discomfort. At best it could lead to lead to a reduction in your performance, at worst it could lead to an impaired judgement that could possibly lead to injuries.”- BMC Helmet Guidebook
- Adujstable head band via the wheel at the rear, and adjustable Y straps; allow for comfortable and optimal fit.
User Instructions
Download the PDF -
Badami Anchor Pack
₹1,500.00This pack has been put together keeping Badami climbing season in India in mind. The pack includes the following equipment
5 pcs. M10 Dynamo Rock Hanger (Material grade: SS 304)
5 pcs. M10 Nuts only (Material grade: SS 304)
1 pc. Badami Nut Tool
Hangers have EN959 and CE 3076 certification
Breaking Strength of Hangers: 32kN in Radial direction of loading -
Badami Nut Tool
₹1,030.00One Tool to rule them all!
A versatile nut tool designed for Trad, mixed- Sport and Big Wall climbing. Tightens nuts and maillons, wriggles out those obstinate nuts, and the hooked nose grabs onto cam bars in the deepest cracks. The screw driver end helps undo those stubborn knots, works as a pry tool, and finding an additional new use for this multi-tool is not a challenge.
– Weight: 64 g (2.3 oz.)
– Material: Zinc plated hardened Steel
– Built in wrenches of sizes 13, 17 & 19 mm, which work with 10, 12 mm & 3/8 inch Rawl bolts, open wrench sizes 14 & 17mm
– Philips head screw driver
– Centimeter markings along the side -
Dynamo Rock Hanger M10
Original price was: ₹299.00.₹229.00Current price is: ₹229.00.– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 10mm, thickness of material: 4mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF -
Dynamo Rock Hanger M10 Pack of 5 – SS304
Original price was: ₹1,399.00.₹1,035.00Current price is: ₹1,035.00.– Pack of 5
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 10mm, thickness of material: 4 mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF -
Dynamo Rock Hanger M12 – SS304
Original price was: ₹299.00.₹221.00Current price is: ₹221.00.– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 12mm, thickness of material: 4 mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF -
Dynamo Rock Hanger M12 Pack of 5 – SS304
Original price was: ₹1,399.00.₹1,035.00Current price is: ₹1,035.00.– Pack of 5
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 12mm, thickness of material: 4 mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF -
Dynamo Expansion Bolt M10x70mm – SS304
₹150.00– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 10mm
– Placement length: 62mm
– Recommended length of bore in rock: 70mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF -
Dynamo Expansion Bolt M10x100mm – SS304
₹190.00Dynamo Expansion Bolt, M10X100mm, SS304, for rock anchors.
-
Dynamo Expansion Bolt M12x95mm – SS304
₹200.00– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 12mm
– Placement length: 87mm
– Recommended length of bore in rock: 95mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF
